BETTER BRANDING STARTS HEREOREGON · EST. 2019(971) 283-6607
Brands and Logos
BAG 1 MAKE IT YOURS ↗
☰
BRANDS & LOGOS

DTF Pressing Guide & FAQ

Everything you need to press our DTF transfers and get your artwork right the first time. Questions we don't cover here? Reach out and a person will answer.

How to press your transfers

These are the settings for the film we print on. Every press runs a little different, so test one transfer before you run a full order.

  1. Heat your press to 302°F (150°C).
  2. Pre-press the garment for 3 to 5 seconds to remove moisture and wrinkles.
  3. Place the transfer ink side down and press for 20 seconds with medium to firm pressure.
  4. Peel the film in one smooth, low motion.
  5. Cover the design with parchment paper or a Teflon sheet and press again for 20 seconds at 302°F. This second press locks the ink into the fabric for a softer feel and longer life.

Works on: cotton, polyester and blends, plus canvas and denim. Test first on nylon, leather or anything heat-sensitive.

Care after pressing

  • Wait 24 hours before the first wash.
  • Wash inside out in cold or warm water. Skip bleach.
  • Tumble dry low or hang dry.
  • Don't iron directly on the design.

Frequently asked questions

What file should I send?

A PNG with a transparent background, sized at the size you want it printed, at 300 DPI. Anything that isn't part of the design, including white backgrounds, should be removed. The builder also takes JPG, SVG, PDF and other common formats.

Can I upload a sheet I already laid out?

Yes. Choose Upload a Finished Sheet and send a PNG up to 250 MB. We match it to the closest sheet size.

Don't have a finished sheet?

Use the online builder. Add your logos and designs, set the sizes, and it fits them onto the sheet for you.

How big can a sheet be?

30 in wide, from 20 in up to 300 in long.

Is there a minimum order?

No minimum. Order one sheet or a hundred.

How fast will I get my order?

Orders ship within 48 hours of artwork approval.

Do you check my artwork?

Yes. A person checks every file before it prints. If something looks off, like low resolution or a leftover background, we reach out before printing.

How should I store transfers before pressing?

Keep them flat, in a cool, dry place, out of direct sunlight.

Can I print any design?

Please send only artwork you own or have permission to print.